Skip navigation.
Home
Climbing Robot
Treebot

Treebot

AN INCHWORM-LIKE TREE-CLIMBING ROBOT

The objective of the development of Treebot is to assist or replace human being in performing forestry tasks on trees. Treebot is composed of a pair of tree grippers that permits Treebot to attach on a wide variety of trees with a wide range of gripping curvature, and a novel continuum maneuvering structure that permits Treebot has high maneuverability and adaptability. In the robot actuation, merely five actuators are necessary. Although Treebot weighs 600grams only, it has payload capability of 1.75kg which is nearly three times of its own weight.

A certain level of autonomous climbing ability of Treebot is helpful to reduce the complexity of manipulation by users. An autonomous climbing strategy for Treebot is thus proposed. To determine the motions to climb up autonomously in an unknown environment, a robot must be equipped with sensors that can explore the environment. Vision-based sensors provide rich information about the environment. However, they require a great deal of computational power. Moreover, light conditions vary in outdoor environments, which may affect the accuracy of visual information. There are many living creatures that do not rely on visual information, but can navigate well in their natural environment. Inchworms, for example, navigate on trees by using only their sense of touch. Although the information obtained by tactile sensors is not rich, it is reliable. Furthermore, the processing of tactile information is much simpler than that of visual information.

Inspired by arboreal animals, an algorithm is developed to allow Treebot to climb irregularly shaped trees autonomously by using tactile sensors and a tilting sensor only. The development of the algorithm can also reveal how tactile sensors can best be employed in autonomous tree climbing.

REUTERS - Treebot: The tree-climbing forest sentinel


IEEE Spectrum's Automation Blog - Treebot Learns to Autonomously Climb Trees

Publications

1. Tin Lun Lam and Yangsheng Xu, "Climbing Strategy for a Flexible Tree Climbing Robot - Treebot", IEEE Transactions on Robotics, Vol.27, No.6, pp.1107-1117, 2011.

2. Tin Lun Lam and Yangsheng Xu, "Mechanical Design of a Tree Gripper for Miniature Tree-Climbing Robots", IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.1487-1492, San Francisco, California, USA, 25-30 September, 2011.

3. Tin Lun Lam and Yangsheng Xu, "Treebot: Autonomous Tree Climbing by Tactile Sensing", IEEE International Conference on Robotics and Automation, pp.5849-5854, Shanghai, China, 9-13 May, 2011.

4. Tin Lun Lam and Yangsheng Xu, "A Flexible Tree Climbing Robot: Treebot – Design and Implementation", IEEE International Conference on Robotics and Automation, pp.789-794, Shanghai, China, 9-13 May, 2011.

5. Tin Lun Lam, Guoqing Xu, Huihuan Qian, and Yangsheng Xu, "Linear-time Path and Motion Planning Algorithm for a Tree Climbing Robot - TreeBot", The IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.4988-4994, 2010.


Key Investigators: Yangsheng Xu, Tin Lun Lam
Treebot
Related contents
  • Treebot
爬樹機械人(Treebot)的研發目標是協助並代替工人爬到樹木上進行檢查、保養及病蟲害防治等林業工作,可幫助減低工人受傷的風險,提高工作效率,並減少城市樹木倒塌的危機。此外,爬樹機械人亦可用於監察樹上生態以進行科學研究,用途廣泛。
  爬樹機械人主要由一個獨創的高自由度移動裝置及一對機械抓組成,組件結構非常輕巧。該移動裝置不但能夠高度伸縮,而且還能多向彎曲,比較其他只能垂直向上爬行的爬樹機械人,這項嶄新發明能在不規則的樹幹和枝椏之間自由走動,到達樹上不同位置,靈活度和機動性能大大提升。而機械抓則採用了精巧的單驅動及自適應設計,能牢固地抓在各種不同材質、型狀及粗細的樹幹上。靜態時,機械人更能以零功耗牢固地抓在樹幹上,節省電池使用量。爬樹機械人體積小巧,重量只有600克,其負載能力卻高達1.75千克,幾乎是機械人自重的三倍,足以配備一定重量的儀器。
  爬樹機械人亦配備傳感器,可以探索四周的環境,得以自主地在未知的環境中行走。一般機械人多採用視覺傳感器,以接收豐富的環境資訊。然而,這種傳感器卻很容易受戶外光線變化所影響。事實上,自然界有很多生物皆不需要依賴視覺資訊亦能行動自如,例如尺蠖就是憑觸覺在樹上四處行走。儘管觸覺傳感器獲得的信息遜於視覺傳感器,但卻更為可靠,不會受環境變化所影響。因此,爬樹機械人亦採用了觸覺傳感器對環境進行探索及重建,從而自主設定最佳前進路線。